The supplied C32 Pro manual covers Da Fit pairing, button and touchscreen controls, health measurements, 100+ sports modes, GNSS activity tracking, barometric pressure, altitude, compass use, and FAQs.
Charge the watch with its supplied charging cable before pairing.
Turn on Bluetooth and location services on your phone, then install or update Da Fit.
In Da Fit, choose Add Device and select the matching Bluetooth device name shown below.
Confirm the pairing prompt on the phone and watch. To replace a connected phone, use App > Remove Device first.
Choose C32 PRO in Da Fit, or scan its QR code where available. Before Bluetooth calling, accept the relevant phone permission.
Pair from inside Da Fit rather than only from phone Bluetooth settings.
02 - Daily use
Charging, fit, and controls.
Wear the watch comfortably with the sensor against the skin. Remove the protective film from the back before use, avoid wearing it over a bone joint, and keep the strap secure during exercise.
Use the supplied charging accessory and keep the charging contacts, cable, and device dry during charging.
Use the Power, Custom, and Sport buttons together with the touchscreen controls described in the manual.
The manual lists 100+ sports modes, including running, cycling, swimming, hiking, and rope skipping.
For continuous heart rate, open Da Fit > Other Settings > All-day heart rate.
Barometric pressure and altitude are estimates; weather changes can affect altitude accuracy.
Calibrate the electronic compass on your wrist and keep it away from electromagnetic interference.
03 - Health and activity
Use measurements responsibly.
For more reliable heart-rate readings, wear the watch snugly and avoid loose contact. Skin condition, tattoos, hair, movement, and other factors can affect readings.
Measurements are for general wellness reference only and are not intended for medical diagnosis or treatment.
Outdoor positioning
GPS and outdoor activity.
For outdoor activity, allow time for positioning before recording. Keep the watch paired with Da Fit; start outdoor workouts from the app and carry the phone when using the phone’s GPS. GPS accuracy can be affected by buildings, signals, metal interference, weather reflections, and open-sky conditions.
Official manual illustrations
See the original visual instructions.
These illustrations are reproduced from the supplied C32 Pro manual. Open the PDF for the complete multilingual version.
Controls and chargingOfficial button, sensor, charging-port, and wake-screen diagram.Pair with Da FitOfficial Android pairing flow, device selection, and call-permission screens.Sports and GNSSOfficial sports-mode, GNSS-positioning, and smart-drainage guidance.
04 - Troubleshooting
Common C32 Pro questions.
Why can’t the watch connect through the app?
Unpair Bluetooth devices on the phone, remove the device in Da Fit, then reconnect according to the pairing steps. Restart the watch and phone if needed.
Why is collected data inaccurate?
Check personal information in the app, remove any protective film from the back, wear the watch neither too loose nor too tight, and reset it to recheck accuracy.
Why are notifications or contacts missing?
Allow phone notification access for Da Fit and enable the relevant app notifications. For incoming-call contacts, enable Contact Sharing and Call Log from the phone Bluetooth settings for the watch.
Why is GPS slow or inaccurate?
Update the watch’s ephemeris data, let positioning initialize for 5–10 minutes in stable mobile-network conditions, and use open areas where possible.
